AL112NX Alarm Horn Sounder & Xenon Strobe Beacon
The AL112NX features the 119dB(A) A112N alarm horn sounder combined with the L101X Xenon strobe beacon. The compact, robust housing is ideal for all general signalling applications including fire, security and process control.
The 5 Joule Xenon strobe generates over 200 candela of light output. DC versions have multile flash rates selectable udring installation. Sounder & beacon may be connected from a single supply for simultaneous operation or from separate supplies for independent operation.
- Automatic synchronisation on multi-sounder system.
- High output Xenon beacon.
- DC voltage units feature multiple flash rates.
- Continuously rated.
- Stainless steel fixings.
- Unit can be mounted using external lugs or internal BESA compatible fixing positions.
- Duplicate cable terminations (in & out for daisy-chain installations).
- Tropicalisation available on request.
- Available with custom tone configurations and frequencies.
- ‘Programmable’ version available:
- 45 alarm tones
- 4 remotely selectable stages
- Any tone can be assigned to any stage
- User configurable continuous frequency tone
Approvals:
VdS approved: EN54-3 & EN54-23 (CPR 305/2011/EU).
UL & cULs approved: General signalling use.
GOST-R approved: POCC GB-JB05-H0014.
| Specification: | |
| | |
| Sounder: | |
| Max. output: | 119dB(A) @ 1 metre [110dB(A) @ 10ft/3m] |
| Nominal output: | 112dB(A) @ 1m +/- 3dB - Tone 2 |
| [103dB(A) @ 10ft/3m] |
| No. of tones: | 45 (UKOOA / PFEER compliant) |
| No. of stages: | 3 |
| Volume control: | Max. 112dB(A); Min. 100dB(A) - Tone 2 |
| Effective range: | 125m/410ft @ 1KHz |
| Voltages DC: | 24vDC (10-30vDC); 48vDC (35-60vDC) |
| [DC units can use 24vAC for single stage applications.] |
| Voltages AC: | 24vAC; 115vAC; 230vAC |
| Stage switching: | Negative - |
| Reverse polarity stage switching on DC units. |
| | |
| Beacon: | |
| Energy: | 5 Joules (5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 500,000 cd - calculated from energy (J) |
| Effective | |
| Intensity: | 250 cd - calculated from energy (J) |
| Peak Candela: | 86,935 cd* - measured ref. to I.E.S. |
| Effective | |
| Intensity: | 200 cd* - measured ref. to I.E.S. |
| Lens colours: | Red, Amber, Yellow, Green, Blue, Clear,& Magenta |
| Tube life: | Emissions are reduced to 70% after 8 million flashes |
| | |
| General: | |
| IP: | IP66 |
| Housing material: | High impact UL94 V0 & 5VA FR ABS |
| Lens material: | PC |
| Colour: | Red (RAL3000) or Grey (RAL7038) |
| Cable entries: | 2 x M20 clearance gland entries in side & back |
| Terminals: | 0.5 to 4.0mm² cables |
| Operating temp: | -25 to +55°C [-13° to +131°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative | |
| humidity: | 90% at 20°C [68°F] |
| Weight: | DC: 2.00kg [4.4Ibs] / AC:2.30kg [5.06Ibs] |
* Candela measurements representative of performance with clear lens at optimum voltage.
* SPL data +/-3dB(A). Measured at optimum voltage.
| Part Codes: | AL112NX [u] [x] / [y] |
| | |
| Makes this part code: | AL112NX DC012 R / B |
(The actual choices for this particular model are highlighted in red below)
| Version: | Part code: |
| | |
| Product type: | AL112NX |
| | |
| [u]: Voltage: | |
| 12vDC: | DC012 |
| 24vDC: | DC024 |
| 48vDC: | DC048 |
| 24vAC: | AC024 |
| 115vAC: | AC115 |
| 230vAC: | AC230 |
| | |
| [x] = Housing colour: | R: Red ; G: Grey |
| | |
| / [y] = Lens colour: | R: Red; A: Amber ; Y: Yellow |
| G: Green ; B: Blue ; C: Clear |
| M: Magenta |
| | |
| - [s] = Suffix part number: | "Blank" (no suffix) = Standard version |
| Note: Standard beacon configuration |
| is upward or downward facing. |
| F: Forward facing Xenon beacon |
| (see illustration below) |
| P: Programmable, 4 stage, 45 tone version |
| (not available with UL approval). |
| UL: UL approved version |
CPR - EN54-3 & EN54-23:
| Part codes: | AL112NXDC024[x]/C-F, AL112NXDC048[x]/C-F |
| Environmental class: | Type B - for outdoor use |
| Visual range: | Category W-2.4-4.8 (24V dc) |
| Category W-2.5-5.0 (48V dc) |
| Signal colour: | Clear (1Hz) |
Electrical data:
| Alarm sounder: | | | |
| | | | |
| Version: | Frequency: | Voltage: | Current: |
| 12/24vDC | | 10-30vDC | 200mA* |
| 48vDC | | 35-60vDC | 120mA* |
| 24vAC | 50/60Hz | +/-10% | 500mA |
| 115vAC | 50/60Hz | +/-10% | 100mA |
| 230vAC | 50/60Hz | +/-10% | 60mA |
* current at nominal voltage on Tone 2
| Xenon beacon: | | | |
| | | | |
| Version: | Frequency: | Voltage: | Current: |
| 12vDC | | 10-14vDC | 500mA |
| 24vDC | | 20-28vDC | 250mA |
| 48vDC | | 42-54vDC | 175mA |
| 24vAC | 50/60Hz | +/-10% | 300mA |
| 115vAC | 50/60Hz | +/-10% | 70mA |
| 230vAC | 50/60Hz | +/-10% | 35mA |