GNEXCP6B-PT Tool Reset Call Point - RED
Part code: Ex Call Point GNExCP6B-PT-S-N-D-P-RD-24-ExxxR-SxxxR
Version: PT = Tool Reset
Switch Type: S = Single Pole c/o switch
Stopping Plugs: N = Nylon
Terminals: D = DIN Rail 8 x 2.5mm²
Duty Label: P = Metalised Polyester
Body Colour: RD = Red
Voltage: 24 = 24v System voltage
E.O.L.Module: ExxxR = ExxxR Resistor value in Ohms (MUST BE SPECIFIED)
Series Module: SxxxR = SxxxR Resistor value in Ohms (MUST BE SPECIFIED)
The GNExCP6A manual call points are available as break glass, push button or tool reset versions. They are approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. Available with either single or double pole change over switches. All versions are certified to ATEX and IECEx standards.
Specification:
GNExCP6A: II 2G Ex e d IIC T6 Gb
II 2D Ex t IIIC T60°C Db
IP66
Ambient: Ta = -40°C to +55°C
Ingress protection: IP66
Housing material: GRP - glass reinforced polyester (UV stable)
Colour: RAL3000 Red (others available on request)
Cable entries: 2 x M20 clearance top and 1 x M20 clearance side. Back box can be rotated to give 2 x bottom and 1 x side entries.
Stopping plugs: 2 x Ex e nylon plugs as standard. Brass and stainless steel plugs optional.
Terminals: 6 x 4.0mm² cables.
Options:
• Alternative housing colours are available to meet specific requirements.
• Single or double pole c/o switch.
• Metalised polyester or stainless steel Duty label.
Approvals:
• ATEX certificate: Sira 09ATEX3286X, IEC 60079-0:2007 Ed 5, EN 60079-1:2004, EN 60079-7:2007, IEC 60079-18:2009 Ed 3, EN 61241-1:2004
• IECEx certificate: IECEx SIR 09.0121X, IEC 60079-0:2007-10 Edition: 5, IEC 60079-1:2003 Edition: 5, IEC 60079-18:2009 Edition: 3, IEC 60079-7:2006-07 Edition: 4, IEC 61241-1:2004 Edition: 1