Wireless universal transmitter
RF I/O SW868-4E-Vcc-ext
Material number: 1362723
Features/Options:
* Thermoplastic enclosure
* sWave® wireless technology
* 4 connectors: for the use with wireless sensors, series RF and/or external NO contacts with gold contacts
* No wiring and pipe laying required
* External power supply via M12 female plug-in connector
* Easy programming of receiver
* Output signal can be individually configurated at the receiver
Technical data:
Standards: EN 60947-5-1; EN 61000-6-2; EN 301 489-1; EN 301 489-3; EN 300 220-1, EN 300 220-2
Enclosure: ABS (Acrylnitril-Butadien-Styrol)
Connection: Sensors: plug-in connector 4 x M12 x 1, 4-pole power supply: 1 x M12 female plug-in connector
Degree of protection: IP 67 to IEC/EN 60529
Protocol: sWave®
Ambient temperature: –20 °C … +65 °C
Switching frequency: approx. 12000 telegrams at repetitions/h
Operation cycles: max. 5 Hz
Rated operating voltage range UB: 18 - 30 VDC Pin 1 and Pin 3 connector M12
Rated isolation voltage Ui: 75 VDC Uimp 500 V
Rated operating current Ie: 2.5 mA
Voltage drop Ue Ua: - 3.5 V with 4 x 50 mA sensor current
Max. load current per sensor connection: 50 mA
Switching point: E1 - E4 > 5 VDC
Frequency: 868.3 MHz
Transmission power: < 25 mW
Data rate: 66 kbps
Channel bandwidth: 266 kHz
Sensing range: max. 450 m outside, max. 40 m inside
Actuating time: min. 80 ms
Note: status signal: individually; adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s